|
|
|
 Hand Hacksaw Blades |
|
Bimetal |
Full -
Flexible |
All Hard |
|
|
|
|
|
| Bimetal High Speed Steel |
A virtually unbreakable bimetal blade for superb cutting performance, wear resistance and safety. The combination of an M2 High Speed ground cutting edge electron-beam welded to a flexible alloy back gives a level of cutting power and flexibility that is far superior to edge hardened or conventional flexible blades. Cuts through all types of materials including alloys and stainless steels.
SIZE IN M.M.
(L x W x T) |
SIZE IN INCHES
(L x W x T) |
TEETH
PER INCH |
UNIT OF
PACK |
250 x 12.5 x 0.63 |
10 x 1/2 x 0.025 |
14,18, 24, 32 |
100 |
300 x 12.5 x 0.63 |
12 x 1/2 x 0.025 |
14,18, 24, 32 |
100 |
300 x 16 x 0.80 |
12 x 5/8 x 0.032 |
14,18, 24 |
100 |
|
|
| All Hard High Speed Steel |
These blades are ideal to use when the work is held securely and the blade is not subjected to bending and twisting stresses. They hold the edge when cutting hard-to-machine alloys, maintaining straightness of the cut. The blades are uniformly hardened throughout.
SIZE IN M.M.
(L x W x T) |
SIZE IN INCHES
(L x W x T) |
TEETH
PER INCH |
UNIT OF
PACK |
250 x 12.5 x 0.63 |
10 x 1/2 x 0.025 |
14,18, 24, 32 |
100 |
300 x 12.5 x 0.63 |
12 x 1/2 x 0.025 |
14,18, 24, 32 |
100 |
|
|
| Flexible Pattern |
These blades have hardened, high speed steel teeth with a tough, shock-absorbing back. They are shatter-resistant and excellent for interrupted cuts and sawing in cramped places where the blade is subject to bending and twisting stresses.
SIZE IN M.M.
(L x W x T) |
SIZE IN INCHES
(L x W x T) |
TEETH
PER INCH |
UNIT OF
PACK |
250 x 12.5 x 0.63 |
10 x 1/2 x 0.025 |
14,18, 24, 32 |
100 |
300 x 12.5 x 0.63 |
12 x 1/2 x 0.025 |
14,18, 24, 32 |
100 |
|
|
| Low Alloy Steel All Hard Hand Hacksaw Blades & Junior Saw Blades |
|
These carbon steel, all-purpose blades are for cutting mild steel, copper, brass, aluminum and similar materials.
SIZE IN M.M.
(L x W x T) |
SIZE IN INCHES
(L x W x T) |
TEETH
PER INCH |
UNIT OF
PACK |
150 x 6 x 0.4 junior saw |
6 x 1/4 x 0.017 |
32 |
100 |
250 x 12.5 x 0.63 |
10 x 1/2 x 0.025 |
14,18, 24, 32 |
100 |
300 x 12.5 x 0.63 |
12 x 1/2 x 0.025 |
14,18, 24, 32 |
100 |
|
|
|
All Hard High Speed Steel |
High Speed Power hacksaw blades of high speed steel satisfy the highest requirements for power sawing bars, tubes, sections, etc. High Speed blades are specially hardened and precision set. Blades suitable for Kasto Machine can also be produced.
SIZE IN M.M.
(L x W x T) |
SIZE IN INCHES
(L x W x T) |
TEETH PER INCH |
UNIT OF PACK |
300 x 25 x 1.25 |
12 x 1 x 0.050 |
10,14 |
20 |
350 x 25 x 1.25 |
14 x 1 x 0.050 |
10,14 |
" |
400 x 25 x 1.25 |
16 x 1 x 0.050 |
10,14 |
" |
425 x 25 x 1.25 |
17 x 1 x 0.050 |
10,14 |
" |
450 x 25 x 1.25 |
18 x 1 x 0.050 |
10,14 |
" |
350 x 32 x 1.60 |
14 x 1.1/4 x 0.062 |
6,10 |
" |
400 x 32 x 1.60 |
16 x 1.1/4 x 0.062 |
6,10 |
" |
425 x 32 x 1.60 |
17 x 1.1/4 x 0.062 |
6,10 |
" |
450 x 32 x 1.60 |
18 x 1.1/4 x 0.062 |
6,10 |
" |
450 x 40 x 1.60 |
18 x 1.1/2 x 0.062 |
6,10 |
" |
450 x 40 x 2.00 |
18 x 1.1/2 x 0.075 |
4,6,10 |
10 |
450 x 45 x 2.25 |
18 x 1.3/4 x 0.088 |
4,6,10 |
" |
500 x 32 x 2.00 |
20 x 1.1/4 x 0.075 |
4,6 |
" |
500 x 40 x 2.00 |
20 x 1.1/2 x 0.075 |
4,6,10 |
" |
525 x 40 x 2.00 |
21 x 1.1/2 x 0.075 |
4,6,10 |
" |
525 x 45 x 2.25 |
21 x 1.3/4 x 0.088 |
4,6 |
" |
550 x 40 x 2.00 |
22 x 1.1/2 x 0.075 |
4,6,10 |
" |
600 x 40 x 2.00 |
24 x 1.1/2 x 0.075 |
4,6,10 |
" |
600 x 45 x 2.25 |
24 x 1.3/4 x 0.088 |
4,6,10 |
5 |
600 x 45 x 2.25 |
24 x 1.3/4 x 0.088 |
4,6 |
" |
600 x 50 x 2.00 |
24 x 2 x 0.075 |
4,6,10 |
" |
600 x 40 x 2.50 |
24 x 1.1/2 x 0.100 |
4,6 |
" |
600 x 50 x 2.50 |
24 x 2 x 0.100 |
4,6 |
" |
700 x 40 x 2.50 |
28 x 1.1/2 x 0.100 |
4,6 |
" |
700 x 50 x 2.50 |
28 x 2 x 0.100 |
4,6 |
" |
750 x 40 x 2.50 |
30 x 1.1/2 x 0.100 |
4,6 |
" |
750 x 50 x 2.50 |
30 x 2 x 0.100 |
4,6 |
" |
800 x 50 x 2.50 |
32 x 2 x 0.100 |
4,6 |
" |
900 x 50 x 2.50 |
36 x 2 x 0.100 |
4,6 |
" |
|
|
| Bimetal High Speed Steel |
Combining two materials, tooth line with high alloy high speed steel and body of tough tool steel the blade results in maximum wearing strength and cutting capability, making it far superior to ordinary high-speed steel blades. Blades suitable for Kasto Machines can also be produced.
SIZE IN M.M.
(L x W x T) |
SIZE IN INCHES
(L x W x T) |
TEETH
PER INCH |
UNIT OF
PACK |
300 x 25 x 1.25 |
12 x 1 x 0.050 |
10,14 |
20 |
300 x 32 x 1.60 |
12 x 1.1/4 x 0.062 |
6,10 |
" |
350 x 25 x 1.25 |
14 x 1 x 0.050 |
6,10,14 |
" |
350 x 32 x 1.60 |
14 x 1.1/4 x 0.062 |
4,6,10 |
" |
350 x 32 x 2.00 |
14 x 1.1/4 x 0.075 |
4,6,10 |
" |
350 x 38 x 2.00 |
14 x 1.1/2 x 0.075 |
4,6,10 |
" |
400 x 32 x 1,60 |
16 x 1.1/4 x 0.062 |
4,6,10,14 |
" |
400 x 32 x 2.00 |
16 x 1.1/4 x 0.075 |
4,6,10 |
" |
400 x 38 x 2.00 |
16 x 1.1/2 x 0.075 |
4,6,10 |
" |
425 x 32 x 1.60 |
17 x 1.1/4 x 0.062 |
10 |
" |
450 x 32 x 1.60 |
18 x 1.1/4 x 0.062 |
4,6,10,14 |
" |
450 x 32 x 2.00 |
18 x 1.1/4 x 0.075 |
4,6,10 |
10 |
450 x 38 x 2.00 |
18 x 1.1/2 x 0.075 |
4,6,10 |
" |
450 x 45 x 2.25 |
18 x 1.3/4 x 0.088 |
4,6 |
" |
475 x 45 x 2.25 |
19 x 1.3/4 x 0.088 |
6 |
" |
500 x 38 x 2.00 |
20 x 1.1/2 x 0.075 |
4,6,10 |
" |
500 x 45 x 2.25 |
20 x 1.3/4 x 0.088 |
4,6 |
" |
500 x 50 x 2.50 |
20 x 2 x 0.100 |
4,6 |
" |
525 x 38 x 2.25 |
21 x 1.1/2 x 0.075 |
6 |
" |
525 x 45 x 2.25 |
21 x 1.3/4 x 0.088 |
4,6 |
" |
525 x 50 x 2.50 |
21 x 2 x 0.100 |
4,6 |
" |
550 x 45 x 2.25 |
22 x 1.3/4 x 0.088 |
6 |
" |
550 x 50 x 2.50 |
22 x 2 x 0.100 |
4,6 |
" |
575 x 45 x 2.25 |
23 x 1.3/4 x 0.088 |
4 |
" |
575 x 50 x 2.50 |
23 x 2 x 0.100 |
4 |
" |
600 x 45 x 2.25 |
24 x 1.3/4 x 0.088 |
6 |
5 |
600 x 50 x 2.50 |
24 x 2 x 0.100 |
4,6 |
" |
650 x 50 x 2.50 |
26 x 2 x 0.100 |
4,6 |
" |
700 x 50 x,2.50 |
28 x 2 x 0.100 |
4,6 |
" |
|
|
|
|
